86-755-82598236 sales@pcbgoo.com

Printed Circuit Board Prototype

Printed Circuit Board Prototype

PCB prototyping used to the nightmares of many electronics professionals. PCBGOO now terminates the nightmares! We can get your first-try boards in 24 hours!

After placing your order, our engineer will audit your Gerber files to make sure it complies with our technical spec. Once the files pass the audit, you can pay the cost online. Also, our engineer will check again and optimize the files to make production. 

The prototyping stage is the most critical period for engineers, students, and hobbyists. For manufacturing PCB, PCBGOOhas the experience of manufacturing PCB for more than 18 years(since 2004). Choosing PCBGOOcan not only shorten the manufacturing time of the PCB but also reduces the cost and get the high-quality boards. Our online PCB calculator will always show the cheapest price and production time.

Check PCBGOO PCB manufacturing capabilities in the following table:

Item Capability
Layers 1-30
Thicker Copper 1-6OZ
Products Type HF(High-Frequency)&(Radio Frequency) board, Impedance controlled board , HDI board ,


BGA& Fine Pitch board

Solder Mask Nanya&Taiyo ;LPI & Matt Red, green, yellow,white, blue,black.
Base material FR4(Shengyi China、ITEQ, KB A+,HZ), HI-TG, FR06, Rogers,Taconic、Argon and so on
Finished Surface Conventional HASL,Lead-free HASL,Falsh Gold, ENIG (Immersion Gold)OSP(Entek), Immersion Tin,ImmersionSilver,Hard Gold
Selective Surface Treatment ENIG(immersion Gold)+OSP, ENIG(immersion Gold)+Gold Finger,Flash Gold +Gold Finger,


immersion Silver+ Gold Finger, Immersion Tin+Gold Finger

Technical Specification Minimum line width/gap:3.5/4mil(laser drill)
Minimum hole size:0.15mm(mechanical drill)/4mil(laser drill)
Minimum Annular Ring: 4mil
Max Copper thickness: 6OZ
Max Production size:900×1200mm
Board Thickness:D/S: 0.2-7.0mm, Multilayers:0.40-7.0mm,
Min Solder Mask Bridge:0.08mm
Aspect ratio: 15:1
Plugging Visa capability: 0.2-0.8mm
Tolerance Plated holes Tolerance:0.08mm(min±0.05)
Non-plated hole tolerance:0.05min(min+0/-0.05mm or +0.05/-0mm)
Outline Tolerance:0.15min(min±0.10mm)
Functional test :
Insulating resistance : 50 ohms (mormality)
Peel off strength: 1.4N/mm
Thermal Stress test :2650c,20 seconds
Solder mask hardness:6H
E-Test voltage :500V+15/-0V 30S
Warp and Twist: 0.7% (semiconductor test board≤0.3% )

Try now! More information please check:

PCB Instant Quote